Optris PI 1M, Short Wavelength IR Camera for Metallic Surfaces, measurement range (450 .. 1800°C)

The newly developed thermal camera optris PI 1M is especially suited for temperature measurements of metals, as these exhibit a distinctly higher emissivity at the short measurement wavelength of 1μm than at measurements in the previously conventional wavelength range of 8-14 μm. The high-definition optris PI 640i infrared camera is best used in applications where finest thermal details matter. It significantly contributes to process optimization in both research and development and in industry.

In parallel with the visualization of a thermal process, the high-performance sensor electronics allow a short reaction time of 1ms for the displaying of the temperature information of the center pixel.

Due to its compact design, with a body sized 45x56x90 -129mm and weighing only 245 - 311 g (depending on lens), and an affordable pricing, the new Optris PI precision thermal camera is ideally suited for OEM applications (SDK software free).

Features:

• Industrial imager with High dynamic CMOS detector with up to 764 x 480 pixels resolution
• Small sized rugged camera with interchangeable lenses
• Wide measurement range from 450 °C to 1800 °C without sub-ranges
• Up to 1000Hz frame rate for monitoring of fast thermal processes
• Real-time analog output with 1 ms response time
• 1 kHz linescanning function possible
• Extensive ready-to-use package for an attractive price, including versatile image processing software with connection cables

Process integration ...

Optional outdoor housing

Technical details of the Optris PI 640i: 

• Detector: CMOS (15 μm x 15 μm)
• Optical resolution (switchable)/ Frame rate:
  • 764 x 480 pixels @ 32 Hz
  • 382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
  • 72 x 56 pixels @ 1 kHz
  • 764 x 8 pixels @ 1 kHz (fast linescanning mode)
• Spectral range: 0.85 – 1.1 μm
• Temperature ranges for optics f=16 mm, f=25 mm: 450 … 1800 °C (27 Hz mode) 500 … 1800 °C (80 Hz and 32 Hz mode) 600 … 1800 °C (1 kHz mode)
• Temperature ranges for optics f=50 mm, f=75 mm: 525 … 1800 °C (27 Hz mode) 575 … 1800 °C (80 Hz and 32 Hz mode) 675 … 1800 °C (1 kHz mode)
• Selectable lenses:
  • FOV @ 382 x 288 px: 20° x 15° (f = 16 mm) 13° x 10° (f = 25 mm) 7° x  5° (f = 50 mm) 4° x 3° (f = 75 mm)
  • FOV @ 764 x 480 px: 39° x 25° (f = 16 mm) 26° x 16° (f = 25 mm) 13° x 8° (f = 50 mm) 9° x 5° (f = 75 mm)
• Thermal sensitivity (NETD)  *1): < 2 K (< 900 °C) < 4 K (< 1400 °C)
• System accuracy (at ambient temperature 23 ± 5°C) *2):
  • For object temperature < 1400 °C: ±1 % of reading for 27/32/80 Hz ±1,5 % of reading for 1 kHz
  • For object temperature < 1600 °C: ±2 % of reading for 27/32/80 Hz ±2,5 % of reading for 1 kHz
• PC interface: USB 2.0
• High speed analog output (@ 1 kHz mode): 0 – 10 V real time output of the center pixel (1 ms response time)
• Standard Process interface (PIF): 0 – 10 V input, digital input (max. 24 V), 0 – 10 V output
• Industrial PIF: 2x 0 – 10 V input, digital input (max. 24 V), 3x 0/4-20 mA output, 3x relay (0 – 30 V/ 400 mA), fail-safe relay
• Cable length (USB): 1 m (standard), 5 m, 10 m 5 m and 10 m also available as HT cable (180 °C)
• Ambient temperature (TAmb): 0 … 50 °C
• Storage temperature: -40 … 70 °C
• Relative humidity: 10 – 95 %, non-condensing
• Enclosure (size/ rating): 46 mm x 56 mm x 90 mm / IP 67 (NEMA 4) *3)
• Weight: 245 – 311 g (depending on lens)
• Shock4): IEC 60068-2-27 (25 g and 50 g)
• Vibration4): IEC 60068-2-6 (sinus-shaped)/ IEC 60068-2-64 (broadband noise)
• Tripod mount: 1/4-20 UNC
• Power supply: USB

Notes:

• 1) At 27 Hz, 32 Hz and 80 Hz
• 2) At an ambient temperature of 25 °C
• 3) Only applies when lens protection tube is used
• 4) For more details see operator‘s manual

Part number: optical resolution / frame rate / thermal resolution

OPTPI1M: 764 x 480 pixels / 1KHz / < 2 K (< 900 °C) < 4 K (< 1400 °C)

Scope of supply: Process imager PI 1M, USB cable (1 m), Standard PIF cable (1 m) incl. terminal block, Table tripod, Software package optris PIX Connect

Software PIX Connect

SOFTWARE PIX CONNECTWATCH SOFTWARE TUTORIALS

Limitless Functionalities, No Extra Cost

The IR analysis software optris PIX Connect sets benchmarks within the thermography branch by offering its users extensive recording and real-time analysis options. In addition, moving measuring objects can be monitored via line scan function. 

A real-time data transfer to external software programms, including radiometric video sequences and snap shots, text files for the analysis in Excel as well as files containing color information for standard programs such as Adobe Photoshop or the Windows Media Player, is supported by the software PIX connect. 

The real time software optris PIX Connect sets benchmarks within the thermography branch and offers its users extensive recording and analysis possibilities.

Advantages of PIX Connect:

• No limitation in licensing
• Complete remote control of the thermal imager
• High degree of individualization for customer specific adjustments
• Video recording and snap shot function
• Linescanner function for measurement of moving objects with limited optical access
• Compatible with Windows 7, 8, 10 and Linux (ubuntu) via Direct-SDK
• Extensive online and offline analysis
• Automatic process control
• Temperature date analysis and documentation
• No additional cost

Suggested Applications

 
Optris Calculator App

One tool, all devices

The Optris Calculator App combines the spot size calculator for IR pyrometers and the optics calculator for Optris IR cameras. It calculates the spot size for each device at any given distance.